DO NOT HAVE IT PLUGGED IN MAIN WHILE DOING THIS!
– Solder on Pins / Use Pin Clip
– Put in Flash Mode (GPIO 0 -> GND) & connect to usb
– Flash Tasmota Bin with ESP Download Tool
Tasmota
ESP Download Tool
– Restart
– Had to short GPIO0 and GRND 3 Times to get to the SmartConfig
– Config Tamsota with Tasmota Config App ( montioring it via Ardiuno Serial Monitor, as the app is saying „failed“ but the board restarts and connects…)
– >On sucess config via Webpage
cuitbuilts 