First test of Colorfabb’s CF 20 special filament:
Layer height: 0.2mm @ 40 mm/s
Nozzle: 260°C Bed: 72°C
No retraction for now…
Printed some parts for the ultimaker.
Note: Material tries to stick to everything. Destroyed part of the E3D’s silicone cover. Best results with close nozzle to the bed on first layer but really hard to get the parts loose afterwards.
This week some new stuff for 2017 arrived:
E3D V6 24V Bowden Set + hardened steel nozzle
Some more special filaments for fun :
And hopefully not needed anymore some more or less usable original spare parts from aliexpress…
Will update as the Ultimaker evolves!
As it’s winter at the moment I noticed a draft from our kitchen windows. Noticed the holding clips for the shades prevented a proper sealing.
So I tried to make a better one. 2 parts for easy printing. With my Printer I could just more or less press fit them together.
Filament: PLA natural
Company: eSun PLA
Diameter:2.80 mm
Layer Height:0.30
Infill 100%
cuitbuilts 