First major print with PETG (Colorfabb PETG Economy)
Nozzle: 240 °C Bed (glass): 80 °C Nozzle 0.4mm LH: 0.2 Print time: 8,5 + 29 + 8 = 45,5 h
Printed the model @ 140% on my Ultimaker Original + did a cut in Meshmixer to fit it on the builtplate… The tip of the tower had a little temp problem but happy with the result so far…
thx 4 the model @ clavenmoo Thingiverse Link
cuitbuilts 